Tips For Replacing a Window Handle
It is easy to change your window handle from the comfort of your home. Follow these steps to ensure a smooth and beautiful finish.
Remove the screw covers from your uPVC handle to expose the screws. Measure the spindle's length to ensure that you receive the right size replacement.
1. Measure the Spindle length
When you're replacing a window handle it's important to get the size of the spindle right. It can affect the tightness or looseness of the handle as well as whether the handle will lock correctly into the frame of the window. The spindle is the steel shaft that connects to the handle as well as the lock inside the window frame. The spindle is available in either the standard 8mm cross-section for industry or the older versions of 9mm. The current industry standard is 8mm, but this wasn't always the case so when buying a new handle it is essential to verify the dimensions.
Remove the handle. This is easily done by turning the handle into the open position, and unscrewing two screws that keep the handle in place (which are usually concealed behind plastic caps that are required to be removed). Once the handle has been removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements needed to purchase a replacement.
There are many choices when it comes to choosing the right window handle from sleek chrome that fits into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms or even the more classic Tudor cottages with curved monkey tail latches! There are many options, but the most important thing is to pick a style that matches your home's style.
Espag handles are commonly used to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, starting at 58mm to 62mm. Window handles made of Cadenza are different in size since they have an angled blade that operates an interlocking mechanism that is multi-point inside the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline espag handles can be used with right or left-handed windows. Cranked window handles are only compatible on windows that open in one direction.
2. Take upvc replacement door handles off
A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. The good part is that replacing the uPVC window handle is a straightforward task you can complete yourself. You'll need only some basic hand tools and some time to complete the task.
First, you have to open the window and ensure that it is in the unlocked position. Next, you need to remove the screws which hold the handle in place. Once the screw caps have been removed you will be able to remove the handle.
The handle is connected to a spindle inside the window frame. Depending on the type the handle is held in place either with a screw or pin. The most common handle types are inline Espagnolette handles and the cockspur handles. Both of these kinds of handles are utilized on casement windows, as well as aluminum windows. You can lock the handles with a key to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will need to use a flat blade screwdriver to release the clip holding the handle. After the clip has been released, the handle will be able to slide off the spindle. Once the old handle is removed, you'll have to take a measurement of the length of the spindle to ensure that the new handle is a good fit.
Once you have the correct size, you can now fix the new handle into place. It is essential to ensure that the handle is securely attached and rotates in the correct direction (clockwise when the handle is open or counterclockwise if the handle closes). It is crucial to ensure that the handle has not been placed upside down.
Finally, you should replace the screw cap caps. Once you have done this, you can test the handle to confirm that it is working correctly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked and back.
3. Take the Screws off
A uPVC window handle is an integral part of any home and is usually the first thing to exhibit signs of wear and wear and tear or damage. This can be caused by natural elements or by regular use, or intentional damage caused by criminals who may seek to open a closed window to gain access to your property. A simple repair can fix the issue and prevent it from occurring again.
UPVC handles can also be difficult to remove when the locking mechanisms are not working correctly. Most of the time, the issue can be resolved by replacing the multipoint lock, rather than the entire handle. It's worthwhile to check this out because it could save you money.
Once you've removed your old handle, you'll need to remove the screws fixing it to the base. These screws are usually found on the inside of the handle base. You may require a screwdriver for this and it's essential to not over tighten the screw as this could cause the handle to loosen.
You'll then have to find the fixing screws or pins that keep the new handle in place. These are usually located on the inside of the handle base. You will need a screwdriver to take them off. If you'd like to, you can replace the screw caps and check the handle to ensure it is working properly.
Install the handle by aligning the spindle with the window's cutout mechanism. Then, screw it in. If you wish to replace the screws, make sure the handle is in a position that is open and that the screws are securely fixed. You're done! Now you can enjoy the newly installed window handle. Hopefully this will help you avoid having to pay for costly window and door replacements in the future. Contact us if need more information on this or any other aspect of your uPVC window.
4. Install the new handle
Whether you're replacing a broken handle or simply changing it the procedure is simple and can be completed in a matter of a few steps. The first step is to determine the type of handle, determine its spindle, and determine what tools you'll require to complete the task. Always ensure security when working with windows and tools. Make sure you follow the steps and make sure that you have an appropriate handle to use.
To begin, find the screws that hold your window handle in place. Remove these while firmly holding the handle to prevent it from falling and causing an injury. After the screws have been removed and repositioned, they can be put in a secure location to be replaced later.
After the handle that was used previously was removed, you can now begin fitting your new one. It is essential that the handle is fitted perfectly so that it is functional and secures the window in position. The next step is to slide the square metal bar to the back of the handle into the hole of your window mechanism, making sure it fits securely.
Now that the new handle is in place, the last thing to do is replace the caps on the screws and check to see if it works. If you're not satisfied with the result or if the window doesn't open and close as it should the next step is to call our experts who can help.
Most homes in the UK have uPVC windows, and as such, many of them will have to be replaced at some point due to damage or wear. Anyone with some DIY experience can easily accomplish the task. The most crucial aspect to the success of the procedure is making sure you're using a replacement handle that matches the window's dimensions and style. If you're not sure what type of handle you need, feel free to get in touch with our team who can help you navigate the various possibilities available.